PLC-RSC- PHOENIX CONTACT RELAY SOCKET Type no. 48DC/21
Contact type: 1 PDT
Type of switch contact: Single contact
Contact material: AgSnO
Maximum switching voltage: 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage: 5 V (at 100 mA)
Min. switching current: 10 mA (at 12 V)
Maximum inrush current: 10 A (4 s)
Limiting continuous current: 6 A
Interrupting rating (ohmic load) max: 140 W (at 24 V DC),20 W (at 48 V DC),18 W (at 60 V DC),23 W (at 110 V DC),40 W (at 220 V DC),1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947: 2 A (at 24 V, DC13),0.2 A (at 110 V, DC13) ,0.1 A (at 220 V, DC13),3 A (at 24 V, AC15),3 A (at 120 V, AC15) ,3 A (at 230 V, AC15)
Nominal input voltage UN: 48 V DC
Typical input current at UN: 9.2 mA
Typical response time: 5 ms
Typical release time: 8 ms
Protective circuit: Reverse polarity protection Polarity protection diode
Operating voltage display: yes
Power dissipation for nominal condition: 0.44 W
Connection name: Coil side
Connection method: Screw connection
Stripping length: 8 mm
Screw thread: M3
Conductor cross section solid: 0.14 mm² ... 2.5 mm²
Conductor cross section flexible: 0.14 mm² ... 2.5 mm²
Conductor cross section AWG: 26 ... 14
Width: 6.2 mm
Height: 80 mm
Depth: 94 mm