PHOENIX CONTACT SIGNAL CONDITIONER MINI
 
The 6.2 mm wide standard signal 3-way isolating amplifier MINI MCR-SL-I-I(-SP) is used for electrical isolation, amplification and filtering of standard signals.
On the input and output side, the analog standard signals 0...20 mA or 4...20 mA are available, electrically isolated.
Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.
 
No. of channels: 1
Maximum transmission error: ≤ 0.1 % (of final value)
Transmission error, typical: < 0.1 %
Maximum temperature coefficient: < 0.01 %/K
Temperature coefficient, typical: < 0.002 %/K
Limit frequency (3 dB): approx. 100 Hz
Protective circuit: Transient protection
Electrical isolation: Basic insulation according to EN 61010
Degree of pollution: 2
Rated insulation voltage: 50 V AC/DC
Test voltage, input/output/supply: 1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility            Conformance with EMC directive
Noise emission: EN 61000-6-4
Noise immunity: EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Housing material: PBT
Assembly instructions: The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Nominal supply voltage: 24 V DC
Supply voltage range: 19.2 V DC ... 30 V DC
Max. current consumption: < 20 mA
Power consumption: < 450 mW
Number of inputs: 1
Configurable/programmable: no
Current input signal: 0 mA ... 20 mA,4 mA ... 20 mA
 
eCl@ss:
eCl@ss 4.0: 27210120
eCl@ss 4.1: 27210120
eCl@ss 5.0: 27210120
eCl@ss 5.1: 27210120
eCl@ss 6.0: 27210120
eCl@ss 7.0: 27210120
eCl@ss 8.0: 27210120
eCl@ss 9.0: 27210120
 
ETIM:
ETIM 4.0: EC002653
ETIM 5.0: EC002653
ETIM 6.0: EC002653
 
UNSPSC:
UNSPSC 6.01: 30211506
UNSPSC 7.0901: 39121008
UNSPSC 11: 39121008
UNSPSC 12.01: 39121008
UNSPSC 13.2: 39121008
 
Power supply possible via the foot element (TBUS)
Entry-level alternative to configurable signal conditioners
Low power consumption
3-way isolation
Highly-compact isolating amplifier for electrical isolation, conversion, amplification, and filtering of standard analog signals
Fixed signal combinations
Depth: 102.5 mm
Width: 6.2 mm
Height: 93.1 mm