Remote Display Instrument
• Multiple signal input.
• Upper and lower limit alarm function, LED alarm display.
• Multiple current and voltage signal output.
• Permanent preservation of parameters setting even no power.
 
Features
• Temperature drift: ≤0.01%FS/℃ (typical value: about 50ppm/℃ )
• Single-channel sampling period: 500ms
• Compression strength: input/output/power/communication 1000W.AC/min)
• Insulating strength: input/output/power/communication≥100MΩ
• EMC: IEC61000-4-4(EFT), ±4KV/5KHZ; IEC61000-4-5(Surge), mode 4KV, differential mode 2KV
• Setting method: digital setting with light touching the panel.
• Permanent preservation of parameters setting even without power.
• Protection method: alarm if input circuit burn-out, input signal over/less than measuring range.
DISPLAY:
Nixie tube Dual highlighted LED nixie tube digital display
Light cross Analog display the percentage of measuring value
Thermal couple
B(400～1800℃)、S(0～1600℃)
K(0～1300℃)、E(0～1000℃)
T(-200.0～400.0℃)、J(0～1200℃)
R(0～1600℃)、N(0～1300℃)、F2(700～2000℃)
Wre3-25(0～2300℃)、Wre5-26(0～2300℃
Thermal resistance
Cu50(-50.0～150.0℃)、Cu53(-50.0～150.0℃)
Cu100(-50.0～150.0℃)、Pt100(-200.0～650.0℃)
BA1(-200.0.0～600.0℃)、BA2(-200.0～600.0℃)
Liner resistance 0～400Ω、0～500Ω
Remote resistance 0～350Ω、30～350Ω
Direct voltage 0-20mV、0-40mV、0-100mV
Direct voltage 0-5V、1-5V、0-10V、0-5V square root、1-5V square root； input resistance ≥510KΩ
Direct current 0-20mA、0-10mA、4-20mA、0-10mA square root、4-20mA square root；input resistance ≥250Ω
Indicator The LED indicator light on under control/alarm output condition
Control/alarm switch output, switch types are optional
ALM relay contacts output, contact rating: AC220V/0.5A (small) DC24v/0.5a (small) (resistive load)
AC220V/2A (big) DC24V/2A (big)(resistive load)
ACR(K3/K6)—SCR zero trigger pulse output, capacity: AC400V/0.5A
SSR(K4)— Solid-state relay control voltage output, capacity: DC12V/30mA
SOT(K5)— Bidirectional controlled silicon on-off output, capacity: AC400V/7A
Direct voltage DC 1-5V load resistance≥250KΩ (optional big resistance module, load resistance≥4KΩ)
Direct voltage DC 0-5V load resistance≥250KΩ (optional big resistance module, load resistance≥5KΩ)
Direct voltage DC 0-10V load resistance≥4KΩ
Direct current DC 4-20mA load resistance≤600Ω
Direct current DC 0-20mA load resistance≤600Ω
Direct current DC 0-10mA load resistance≤1.2KΩ
 
 
 
INPUTS:
0 B(400~1800℃) 18 Remote resistance 0~350Ω(-1999~9999)
1 S(0~1600℃) 19 Linear resistance 0~400Ω(-1999~9999)
2 K(0~1300℃) 20 0~20mV(-1999~9999)
3 E(0~1000℃) 21 0~40mV(-1999~9999)
4 T(-200~400℃) 22 0~100mV(-1999~9999)
5 J(0~1200℃) 23 Retention
6 R(0~1600℃) 24 Retention
7 N(0~1300℃) 25 0~20mV(-1999~9999)
8 F2(700~2000℃) 26 0~10mV(-1999~9999)
9 Wre3-25(0~2300℃) 27 4~20mV(-1999~9999)
10 Wre5-26(0~2300℃) 28 0~5V(-1999~9999)
11 Cu50(-50~150℃) 29 1~5V(-1999~9999)
12 Cu53(-50~150℃) 30 Retention
13 Cu100(-50~150℃) 31 0~10V(-1999~9999)
14 Pt100(-200~650℃) 32 0~10mA square root(-1999~9999)
15 BA1(-200~600℃) 33 4~20mA square root(-1999~9999)
16 BA2(-200~600℃) 34 0~5V square root(-1999~9999)
17 Linear resistance 0~400Ω(-1999~9999) 35 1~5V square root(-1999~9999)